3/30/2024 0 Comments Lathe and plaster wall![]() I prefer to play it safe for peace of mind. A step by step guide to installing a socket in a lath and plaster wall.The same procedure would be used for light switches, fused spurs, etc.The plaster pr. You cannot lift them single handed (well I can't anyway) and you really do not want them coming off. ![]() Whilst possibly over the top but these radiators are seriously heavy and more so when filled with water (they take a lot). With the larger verticals and no feet I found it easier to take down the lathe and plaster and build a studwork frame to suit the radiator fixings before plasterboarding and re-skimming. With the largest of the column cast iron rads I have fitted I removed a horizontal rectangle of the lathe and plaster and fixed timber at the height of the studs before plastering back over. I would strongly recommend buying the Zircon stud detector which I have found excellent and picking up the line of small lathe nails. ![]() The radiator stays can go between any of columns to suit the stud spacing. The advantage to the columns is you have much more leeway that with the majority of standard radiators where it will be fixed. In my experience the rad brackets never align with two sets of studs even with the small amount of horizontal play. Still I would want it fixed to the studs. How To Fix a Hole in Lath and Plaster Walls Here are two ways approach your lath and plaster repair whether you have a damaged wall or if you need to patch a hole. The majority of the weight is being directed straight down. With the rads like the one pictured I would use feet like mentioned above if at all possible. Current task is a wall hung vertical weighing in a 68Kg dry to lathe and plaster. Have had and am still having the same problem as yourself.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |